AMETEK Crystal T-1-CPF – Hydraulic Pressure Comparator

Description

AMETEK Crystal T-1-CPF – High-Pressure Hydraulic Comparator

The Crystal Engineering T-1-CPF Hydraulic Pressure Comparator by AMETEK Calibration is a rugged, manually operated hydraulic pressure generation system designed for industrial pressure calibration, instrument verification, and maintenance applications.

Part of AMETEK’s Type T Series (System F), the T-1-CPF generates pressures up to 15,000 psi (1,000 bar) without an external powered pressure source.

The comparator incorporates a dual-volume pumping mechanism, precision fine-adjustment control, and a dual-port manifold for connecting a reference pressure instrument and the device under test.

Equipped with Crystal Pressure Fittings (CPF), the T-1-CPF provides secure, leak-resistant connections and supports efficient calibration procedures in industrial workshops, laboratories, and field testing environments.

Key Features and Benefits

• High-Pressure Generation: Produces hydraulic pressure up to 15,000 psi (1,000 bar).
• Dual-Volume Pumping: High-volume/low-pressure and low-volume/high-pressure settings improve pumping efficiency.
• Precision Fine Adjustment: Allows controlled pressure adjustment at pressures up to 3,500 psi.
• Two Pressure Connections: Dual-port manifold accommodates a reference instrument and the device under test.
• Crystal Pressure Fittings (CPF): Secure connections with an integrated self-venting weep-hole design.
• Large Fluid Reservoir: 887 ml capacity supports industrial calibration applications.
• Oil and Water Compatibility: Suitable for approved hydraulic oil or water-based test media.
• Viton Seals: Designed with Viton O-rings for the T-1-CPF configuration.
• Integrated Vent Valve: Supports controlled pressure release following testing.
• Manual Operation: Generates hydraulic pressure without electrical power or compressed-air supply.
• Durable Construction: Rugged benchtop design suitable for demanding calibration environments.
• Instrument Compatibility: Can be paired with suitable calibrated AMETEK Crystal reference pressure instruments.

Technical Specifications

Parameter	Specification
Manufacturer	AMETEK Calibration / Crystal Engineering
Model	T-1-CPF
Product Type	Hydraulic Pressure Comparator
Product Series	Type T / System F
Pressure Range	0–15,000 psi / 0–1,000 bar
Pressure Generation Method	Manual hydraulic hand pump
Volume Control	High-volume and low-volume modes
Fine Adjustment	Up to 3,500 psi
Reservoir Capacity	887 ml / 30 US fl oz
Low-Volume / High-Pressure Output	2.8–3.2 cm³ per stroke
High-Volume / Low-Pressure Output	3.0–4.0 cm³ per stroke
Reference Pressure Port	CPF Male
Device Under Test Port	1/4-inch Female NPT
Seal Material	Viton O-rings
Test Media	Compatible hydraulic oil or water-based fluid
Dimensions (L × W × H)	224 × 127 × 217 mm
Weight	Approximately 8.4 kg
Manifold	Dual-port manifold with fine adjustment
Pressure Release	Manual vent valve
Power Requirement	None – manual operation

Specifications refer to the AMETEK Type T Series T-1-CPF configuration. The manufacturer’s water-based test medium is a specified water/isopropyl alcohol mixture. Fluid compatibility and supplied accessories depend on the selected configuration.

Typical Applications

• Pressure Gauge Calibration: Generating controlled pressures to calibrate analog and digital pressure gauges against a reference instrument.
• Pressure Transmitter Verification: Testing and verifying industrial pressure transmitters and sensors.
• Hydraulic Relief Valve Testing: Setting and checking compatible hydraulic pressure relief valves.
• Pressure Switch Testing: Verifying pressure switch actuation and reset points.
• Industrial Pressure Instrument Calibration: Supporting routine calibration of measurement devices.
• Oil and Gas Industry: Pressure instrument verification during maintenance and commissioning.
• Calibration Laboratories: Providing a high-pressure source for comparison calibration.
• Industrial Maintenance Workshops: Testing and troubleshooting hydraulic pressure measurement equipment.

Compatible Instruments and Accessories

The T-1-CPF can be used with appropriately rated reference instruments and connections, including:

• AMETEK Crystal XP2i Digital Pressure Gauge
• AMETEK Crystal XP3i Digital Pressure Gauge
• AMETEK Crystal nVision Reference Recorder
• Crystal CPF pressure fittings and adapters
• CPF-to-NPT and CPF-to-BSP adapters
• Compatible hydraulic test fluids
• Replacement Viton seal kits
• Optional System F carrying case and accessories

The connected reference instrument determines measurement accuracy. The pump itself generates pressure and does not independently measure it.

Why Choose the AMETEK Crystal T-1-CPF?

The AMETEK Crystal T-1-CPF combines high-pressure generation, dual-volume pumping, and secure CPF connections in a practical hydraulic calibration solution.

Its manually operated design eliminates the need for an electrical supply, while its high-volume setting helps reduce pumping effort during initial pressurization.

The fine-adjustment mechanism allows technicians to establish controlled calibration pressures, and the dual-port manifold simplifies the comparison of pressure instruments against a suitable reference.

For industrial calibration laboratories, oil and gas facilities, and maintenance workshops, the T-1-CPF offers a reliable solution for pressure generation and instrument verification.

MIQIAS – Authorized AMETEK Service Center in Iraq

MIQIAS I.I.C. Services Ltd is an Authorized AMETEK Service Center in Iraq, providing technical support, product enquiries, and assistance with AMETEK pressure measurement and calibration instruments.

MIQIAS serves industrial customers across Iraq, supporting pressure calibration, instrumentation, inspection, and maintenance applications.

Email: ndt@miqias.com

Website: www.miqias.com

Locations: Erbil, Baghdad, and Basra – Iraq.